Showing 28–54 of 439 results
The wheel caddie provides a safe method of handling wheel sets. Steel frame with hard wood mounted pads protects the axle from nicks caused by forklifts. Nicks in axles has been linked to axle failure.
Side Access Wheelset Handler$2,446.44
Designed to remove and install wheelsets.
Provides access from the side of the car.
Works on wheelset diameters of 28″
Notches are provided in the forklift pocket rails
to ensure the wheelset does not move during transport
Our hydraulically operated wheel handling system quickly and safely loads or unloads wheelsets from flat cars or trucks. It features a spring-loaded automatic wheel gripping device that also provides a fail-safe lock in case of hydraulic hose or fitting failure. A safety chain is included to provide secure fastening to the forklift mast. A forklift having a two stage mast, and one auxliary hydraulic control valve to operate one double acting cylinder is required to disengage the auto lock .
Fork Pockets have removable spacers for larger fork diameters
up to 6″ wide x 2-3/4″ thick.
Hydraulic Side Access Wheel Fixture$2,625.47
The Hydraulic Side Access Wheelset Handling Fixture provides a safe easy method of removing any size wheelset from the side of the freight car. The hydraulicaly operated gripper makes replacement a one person job. The fixture fits over the forklift tines with a safety chain that hooks over the forklift mast to keep the fixture in place during wheel handling. Forklift must be equipped with an auxiliary hydraulic control valve for operations of the double acting hydraulic cylinder,
can be used.
Manual Side Access Wheel Fixture$2,646.95
Same as our Hydraulic Side Access Wheelset Handling Fixture, only manually operated.
The fixture fits over the forklift tines with a safety chain that hooks over the forklift mast to keep the fixture in place during wheel handling.
Freight Car Truck Removal and Installation Fixture$786.42
The fixture is for removing and installing truck assemblies
under freight cars. It may be used with any forklift having fork tine dimensions of 2” thick by 6” wide or smaller. Forklift capacity and fork tine length are not factors.
Reach 10′-6″ Overall length 12′
Not For lifting
Single-Tine Coupler Carrier$1,079.07
The Single-Tine Coupler Lifting Fixture will remove, install and transport any style “E” or “F” coupler. The tool steel grabbing hook allows the fixture to handle any coupler with any length of shank, up to and including sixty inch. An alignment arrow is installed to assist the operator with lifting lug placement. A safety chain is included to secure the fixture to the forklift mast during handling
Single Fork Application
DOUBLE-TINE COUPLER CARRIER$1,237.20
This fixture is used to remove, install, and transport any type of E or F style coupler. It is compatible for use with standard or long shank couplers.
Bar Style Coupler Lifting Fixture$828.39The Bar Style Coupler Handling forklift fixture is used to remove, install, and handle freight car couplers.
- The pin design allows the coupler to be accessed from any position on the ground. The coupler does not have to be upright for handling.
- The design also allows the rotation necessary to install and remove 304 style rotary couplers.
- Chains are provided to secure the handling fixture to the forklift, and to secure the coupler to the handling fixture.
Winks Multi Table$4,889.41The Winks Multi Table is a double tine forklift attachment that is used for taking out and installing draft gear assemblies and EOC’s.
- The head on the front of the fixture has multiple sets of holes for different cradles to hold a draft gear assembly or an EOC.
- This head rotates to allow for easier positioning.
- Two sliding support arms slide which run on a track to hold the carrier plate during these removals or installations. One of these support arms has a square base so that it can be rotated 90 degrees to fit up into the sill. The support arms can be raised by adding extension pegs to their risers.
Draft Gear Assembly Installation fixture$1,746.02
The Draft Gear Assembly Installation fixture may be used with any forklift having a rated capacity of 6,000 lbs. or greater. The rotating head allows quick, simple position of the assembly. The fixture is long enough to allow access from either the front or sides of the freight car.
Forklift Lifting Fixture 3” Fork Width$470.00Unique design, the heavier the load the tighter the grip. No tools required for attaching. Slides on to fork, tighten the two hand knobs and secure the safety chain. Extension Shackle and Swivel Auto Lock Hook included. W.L.L. 3000 Lbs.
3” Fork Width
Forklift Lifting Fixture 4” Fork Width$480.00Unique design, the heavier the load the tighter the grip. No tools required for attaching. Slides on to fork, tighten the two hand knobs and secure the safety chain. Extension Shackle and Swivel Auto Lock Hook included. W.L.L. 3000 Lbs.
Fits on 4” Wide Forks.
Forklift Lifting Fixture 5” Fork Width$490.00Unique design, the heavier the load the tighter the grip. No tools required for attaching. Slides on to fork, tighten the two hand knobs and secure the safety chain. Extension Shackle and Swivel Auto Lock Hook included. W.L.L. 3000 Lbs.
Fits on 5” Wide Forks.
Forklift Lifting Fixture 6” Fork Width$500.00
Fits on 6” Wide Forks.
Hopper Gate Installation Fixture$1,094.74
The fixture provides a better way to install hopper gates. Measures 80 inches long, with a 360 degree 26″ X 36″ swivel top plate, making for easier bolt hole alignment.
Locomotive Side Work Platform$2,197.53
This platform system is designed to provide access to locomotive car bodies from elevated ramps. It mounts on the locomotive car body and hand rail.
Platform Weight: Complete Assembly
With Platform & Ladder 74 Pounds
Platform Assembly Alone – 42 Pounds
Ladder Assembly Alone – 32 Pounds
Rated Capacity: 350 lbs.
Aluminum Side Access Work Platform$3,340.82
This platform provides a sturdy work surface for working on the side of locomotives.
- The platform conects to the hand rail using a quick release pin
- It has a drop down extension that faces the locomotive.
- Both legs of the platform have adjustable bases so they can be set the height needed.
- The dimensions of the platform are 21″ W x 49″ D x 40″ H.
- There are many different configurations of this platform with gates, lifting chains, etc. Please contact us at 402-253-2772 for more information on configurations other than the standard side work platform.
Aluminum Freight Car Access Platform$2,697.76
This platform is designed to allow easy access to the interior of any box car to perform cleaning or repairs. The platform height is designed to match the box car floor height, allowing safe entry into the interior. The aluminum design keeps the platform weight to a minimum, and the ten inch pneumatic tires provide easy movement across rough floors.