Material Storage
Showing 55–81 of 103 results
-
Add to cartMORE INFONarrow Cross Over Board Rack
$1,309.91Use this narrow version of our Cross Over Board Rack to store smaller cross over boards or other light material. The rack width may be changed if necessary to meet specific storage requirements.The rack capacity is 200 lbs. per level. Rack dimensions are 66” tall, 20” wide, 32” deep.
-
Add to cartMORE INFOSingle Sided Hand Brake Equipment Storage Rack
$1,496.96Single sided rack is designed to securely store 6 hand brake wheels and 4 hand brakes.The rack dimensions are forty inches wide, seventy-seven inches long, and fifty-nine inches high. A hook is provided to hold our Hand Brake lifting fixture which may be purchased separately. -
Add to cartMORE INFODouble Sided Hand Brake Equipment Storage Rack
$1,774.52Our double sided rack is designed to securely store sixteen hand brake wheels and eight hand brakes. The double sided configuration keeps the required floor space to a minimum.
The rack dimensions are forty inches wide, seventy-seven inches long, and fifty-nine inches high. A hook is provided to hold our Hand Brake lifting fixture which may be purchased separately. -
Add to cartMORE INFOSingle Sided Multi-Purpose Storage Rack
$2,099.92Storage rack features adjustable 7/16″ diameter pins that may be arranged or moved to any combination of positions on the detachable rack arms. They are specifically designed to hold Come-Alongs but not limited to: The pin support tubes provide a convenient place to apply nomenclature stickers for easy part identification. The rack is provided with 12 pin holders.
Free Standing or Wall Mount.
Height 60″ X 27″ Wide X 57″ Long -
Add to cartMORE INFODouble Sided Multi-Purpose Storage Rack
$2,996.86Our new storage rack features adjustable 5/8″ and 7/8″ diameter pins that may be arranged or moved to any combination of positions on the detachable rack arms. They are specifically designed to hold any repair components including, but not limited to: Brake Levers; Handholds: Slack Adjusters: and Bottom Rods. The pin tubes provide a convenient place to apply nomenclature stickers for easy part identification. The rack is provided with 28 each 5/8″ and 28 each 7/8″ pin holders.
Height 60″ X 44″ Wide X 77″ Long -
Add to cartMORE INFOTruck Shim Storage Rack
$3,319.89- This rack is specifically designed to store the shims typically used for truck repair work.
- Includes spaces for side bearing, center plate, and side frame shims.
- The bolt-together design allows for different storage configurations depending on your needs.
- Includes mounting feet to allow the fixture to be bolted to the floor.
- Dimension are 36” Wide X 54” Long X 62” Tall.
-
Add to cartMORE INFOCenter Plate Wear Liner Stand
$467.49- This stand is designed to store all sizes of center plate wear liners.
- Includes holes in the base for permanent mounting to the floor if required.
- The stand has a rated capacity of 500 pounds. It has a 15″ diameter base, and the overall height is 48″.
-
Add to cartMORE INFOLocomotive Gasket Rack
$1,899.93This rack can be used to store any combination of the gaskets normally used for locomotive repairs.- The pegboard design allows the use of custom configurations of hooks or shelving to meet your requirements.
- Includes mounting tabs to secure the rack to the wall or floor.
- The top of the rack is covered with Plexiglas to keep dirt and debris off the gaskets.
- Overall pegboard dimensions are 8’ X 8’. Overall rack dimensions are 8’-6” X 8’-6”.
-
Add to cartMORE INFOTraction Motor Stacking Base
$1,392.96- Provides a stable base and holds the traction motor level.
- Keeps the wheel set from resting on the ground preventing possible damage to the ground surface.
- Can hold the weight of two traction motors stacked on top of each other.
- Holds traction motor combos with wheels up to 44″ in diameter.
- Design changes have recently been made to the base to allow G.E. AC motors to be stacked. Three removable Spacer Blocks accommodate the G.E. AC and all other traction motor types.
- This stacking fixture is not to be lifted with a traction motor assembly on top of it.
-
Add to cartMORE INFOTraction Motor Stacking Base With Lifting Points For Forklift Traction Motor Handling Fixture
$1,594.50- Provides a stable base and holds the traction motor level.
- Keeps the wheel set from resting on the ground preventing possible damage to the ground surface.
- Can hold the weight of two traction motors stacked on top of each other.
- Holds traction motor combos with wheels up to 44″ in diameter.
- Design changes have recently been made to the base to allow G.E. AC motors to be stacked. Three removable Spacer Blocks accommodate the G.E. AC and all other traction motor types.
- This version of the Stacking Fixture is equipped with lifting points on either side for handling with Specialized Forklift Traction Motor Handling Fixtures. They are not designed for handling with conventional forklift tines. This stacking fixture is not to be lifted with a traction motor assembly on top of it.
-
Add to cartMORE INFOTraction Motor Stacking Fixture
$936.60Floor space is something every locomotive shop is in need of. The Traction Motor Stacking Fixtures safely allow motors to be stacked two high, reducing storage space by one hundred percent. Holds traction motor combos with wheels up to 44″ in diameter.It will be necessary to place either a steel or wood block under the traction motor closest to the floor to provide a reasonably level platform to stack the upper motor. Steel stacking bases are available.
Part No. 0032
-
Add to cartMORE INFOTraction Motor Stacking Fixture With Forklift Handling Tubes
$1,193.93Floor space is something every locomotive shop is in need of. The Traction Motor Stacking Fixtures safely allow motors to be stacked two high, reducing storage space by one hundred percent. Holds traction motor combos with wheels up to 44″ in diameter.It will be necessary to place either a steel or wood block under the traction motor closest to the floor to provide a reasonably level platform to stack the upper motor. Steel stacking bases are available.
This version of the stacking fixture is equipped with rectangular tubes that will allow placement of the fixture on the traction motor with a forklift. This stacking fixture is not to be lifted with a traction motor assembly on top of it.
-
Add to cartMORE INFOTraction Motor Stacking Fixture With Lifting Points For Forklift Traction Motor Handling Fixture
$1,098.87Floor space is something every locomotive shop is in need of. The Traction Motor Stacking Fixtures safely allow motors to be stacked two high, reducing storage space by one hundred percent. The design of the fixture allows any combination of motors and wheel diameters upto 44″ to be stacked.It will be necessary to place either a steel or wood block under the traction motor closest to the floor to provide a reasonably level platform to stack the upper motor. Steel stacking bases are also available.
This version of the Stacking Fixture is equipped with lifting points on either side for handling with Specialized Forklift Traction Motor Handling Fixtures. They are not designed for handling with conventional forklift tines. This stacking fixture is not to be lifted with a traction motor assembly on top of it.
-
Add to cartMORE INFOBrake Stick Storage Box
$219.95• Constructed entirely from stainless steel.• Storage areas are provided on the box for switch brooms and shovels.• Reflective tape is applied to the sides and front of the box for night visibility.• Holes are provided in the back plate for mounting with bolts or lag screws. -
Add to cartMORE INFOSmall NRE Tool Box With Acrylic Doors
$3,079.89-
This custom tool box was designed to fit a customers’ specific tool storage requirements.
-
It includes a door actuated LED light with weather-resistant cover.
-
The doors are made of see through, scratch-resistant, acrylic plastic.
-
The box may be customized to meet individual tool storage requirements.
-
This tool box does not include tool shadows.
-
Tools and tool box stands sold separately.
-
