Aluminum Kubota Replacement Bed
- This Aluminum Bed is a bolt-on replacement for the existing steel bed for Kubota 2014 model year and newer 900 and 1100 models.
- The bed adds an additional 14-1/2” of length to provide extra storage area.
- Includes both the front and rear bed rails.
- May be installed using either a forklift or overhead crane.
- Bed dimensions are 59” wide by 55” long.
Side Bearing Height Gauge$375.60
This gauge is used to remotely measure the side bearing clearance on freight cars.
The gage is 6 foot long, It may be used from either the side or end of the car.
Turn the adjustment knob on the end of the gauge clockwise to collapse the gauge fingers to their retracted position
From either the side or end of the freight car, move the gauge into position between the truck and freight car body bolsters
Turn the gauge adjustment knob counter-clockwise until both fingers are tight against the truck and body bolster surfaces
Remove the gauge, and use a tape measure or ruler to measure the distance between the gauging fingers.
26″ Truck Side Frame Support Fixtures ( Set Of Two)$577.20
These fixtures are designed to support freight car truck side frames during wheelset replacement.
They are intended for use at facilities where an overhead or jib crane is not available, allowing wheelsets to be replaced with the use of only a forklift.
Strong steel construction securely supports the side frames.
Brake Rod Support Fixture$139.95
The Brake Rod Support Fixture provides a fast, secure method of retaining brake rods during truck removal. It keeps the rods in place during truck movement, eliminating the possibility of the rod catching on the shop floor or ties on line of road. Ball bearings allow the fixture to move smoothly over the axle and eliminates any possibility of axle scratching.