Defective Wheel Set Handler
$2,289.94
Use our new fixture to transport defective wheelsets to a testing facility for analysis. The base design allows the fixture to be handled with a forklift in any direction. A storage box is included to contain broken wheel sections or bearings. A holder is installed in the toolbox for related paperwork. Ratcheting two inch wide tie-down straps are included with the fixture.
Related products
-
Side Access Center Pin Removal Tool
$509.95Designed to remove and install freight car truck center pins.
Constructed from alloy aluminum to keep the tool weight to a minimum.
The pass-through design allows the tool to be to be slipped over the center pin while it is still engaged with the bolster and center plate.
A simple screw type mechanism located at the end of the handle provides a fast and efficient method of securing the center pin.
Tool is 64″ long and weighs 10 lbs. -
Side Bearing Height Gauge
$536.04This gauge is used to remotely measure the side bearing clearance on freight cars.
The gage is 6 foot long, It may be used from either the side or end of the car.
Turn the adjustment knob on the end of the gauge clockwise to collapse the gauge fingers to their retracted position
From either the side or end of the freight car, move the gauge into position between the truck and freight car body bolsters
Turn the gauge adjustment knob counter-clockwise until both fingers are tight against the truck and body bolster surfaces
Remove the gauge, and use a tape measure or ruler to measure the distance between the gauging fingers. -
Brake Rod Support Fixture
$174.98The Brake Rod Support Fixture provides a fast, secure method of retaining brake rods during truck removal. It keeps the rods in place during truck movement, eliminating the possibility of the rod catching on the shop floor or ties on line of road. Ball bearings allow the fixture to move smoothly over the axle and eliminates any possibility of axle scratching.