Friction Block Retaining Pin
$31.98
Friction blocks must be compressed and pinned any time repairs are made to the bolster or side frames of a ride control truck. Our Friction Block Retaining Pins are made of heat-treated tool steel. The T-handle gives a positive grip when installing or removing, along with a tapered point that helps guide the pin in.
Related products
-
Add to cartMORE INFOEmpty Car Spring Replacement
$4,567.98The Empty Car Truck Spring Replacement Fixture provides
a safe, effective method of replacing broken truck springs
on empty cars in the train yard, eliminating switching moves and out-of service time.
This tool is normally transported in back of a pick-up truck
along with the extra springs, we recommend using a
12 Volt DC hydraulic pump (10,000 PSI) Instructional video
is available. ( Does Not include Pump)
When ordering the Empty Car Spring Change Fixture one needs to specify Tall Base or Short Base. The Tall Base is used for exposed rail and the short base is for tracks that are flush with the pavement. -
Add to cartMORE INFOSide Access Center Pin Removal Tool
$509.95Designed to remove and install freight car truck center pins.
Constructed from alloy aluminum to keep the tool weight to a minimum.
The pass-through design allows the tool to be to be slipped over the center pin while it is still engaged with the bolster and center plate.
A simple screw type mechanism located at the end of the handle provides a fast and efficient method of securing the center pin.
Tool is 64″ long and weighs 10 lbs. -
Add to cartMORE INFOWHEELSET SIDE FRAME RETAINER KEY
$85.78Side Frame Retainer Key is designed to attach to the side frame pedestal to retain wheelsets in the truck assembly.
Use the Retainer Key to keep wheelsets in place during truck repair operations or at derailments. Includes an identification tag attached with a stainless steel cable that describes the company name, part number, and serial number.