G. E. Exhaust Manifold Clamp Pliers$53.43
The pliers are used to pull General Electric Exhaust Manifold clamps together to allow hand tightening of the exhaust clamp nut. The gripping tines are aggressively knurling to keep a firm grip on the clamp during closure. The tines may be installed on either side of the pliers to accommodate left or right hand applications. They may also be used as a conventional pair of adjustable pliers
“Guru” Water Dump Valve Retention Tool Without Case$307.98
Adding cold water to a cold locomotive during cold weather results in the activation of the “Guru” valve, allowing water to drain out of the locomotive cooling system to prevent freeze damage. Our new retention tool prevents the valve from activating, capturing the water until the locomotive has a chance to warm up.
The tool is easily and quickly applied or released with a few turns of the adjusting knob. An eight foot long high visibility cable and magnetic based flashing red LED light are included. The cable is routed to the exterior of the locomotive car body where the red light is applied as a reminder to the operator that the tool is applied.
This part number is just for the tool, cable, and LED light. The part number that includes all of this and the case is 0289-2.
Drop Pit Rail Clamp$894.44
BOLT-ON DROP PIT RAIL CLAMPS
Use these clamps to hold a locomotive in place during traction
motor replacement using drop tables.
The clamps are held securely in place
on the rail simply by tightening two bolts. They are not intended
for use as a derail or other method of blue flag protection.
Item # 0253 –1 ( Set Of Four Clamps)