Locomotive
Showing 82–108 of 134 results
-
Add to cartMORE INFODrop Pit Rail Clamp
$1,449.96BOLT-ON DROP PIT RAIL CLAMPS
Use these clamps to hold a locomotive in place during traction
motor replacement using drop tables.
The clamps are held securely in place
on the rail simply by tightening two bolts. They are not intended
for use as a derail or other method of blue flag protection.
Item # 0253 –1 ( Set Of Four Clamps, Two Left And Two Right)
-
Add to cartMORE INFOAluminum Locomotive Step
$596.92The Aluminum Portable Locomotive Step is designed to slip over the bottom step of any locomotive located over exposed or elevated rail.- It reduces the distance the mechanic has to step to access the locomotive to a manageable twelve inches.
- Aggressive bar grating and abrasive matting provide a non-slip step surface.
- The aluminum alloy construction provides a high-strength device that weighs less than nine pounds.
-
Add to cartMORE INFOGE Fuel Injector Puller
$194.41Injector Puller uses a non-impacting fulcrum effect to accomplish injector removal. Easily attaches to the pipefiting located on top of the injector. With downward pressure applied on the end of the handle rotates the tool on its fulcrum, removing the injector. Light weight and easy to use. -
Add to cartMORE INFOPower Assembly Jewelry Tray
$115.99Made of light-weight aluminum, this tray convenientlyfits over the engine block to hold components and toolsduring power assembly change-out.It places everything at a convenient height and centrallocation, simplifying power assembly replacement.14″ wide X 20″ long 1″ deep -
Add to cartMORE INFOLocomotive ACE Starter Valve Compressor
$389.20This tool is designed to compress the ACE Locomotive Starter Motor Valve to remove the circlip and perform seal replacement.- It allows the valve to remain on the locomotive while repairs are completed.
- The push rod uses an acme type thread for faster operation.
-
Add to cartMORE INFOLocomotive Coupler Lifter With Clevis
$742.65This lifter is designed to remove or install couplers using the large C-Frames normally used for locomotive component repair.- It is specifically designed to easily attach to the C-Frame without modification.
- The fixture includes a pin locking assembly to keep the coupler in place on the fixture during handling.
-
Add to cartMORE INFOService Cart
$1,919.93The Heavy Service Carts are designed and built for multiple uses for freight car and locomotive shops . Made of structural steel along with Flat Free wheels and a rubber pad on top, make these carts your best value for longevity and durability. Comes with a mounting bracket for a Single Car Test Device
24″ Wide X 36″ Long X 36″ Height -
Add to cartMORE INFOService Cart
$1,789.96The Heavy Service Carts are designed and built for multiple uses for freight car and locomotive shops . Made of structural steel along with Flat Free wheels and a rubber pad on top, make these carts your best value for longevity and durability.
24″ Wide X 36″ Long X 36″ Height -
Add to cartMORE INFOFour Wheel Toilet Servicing Cart (With Parking Brake)
$3,142.94Moving and shuffling locomotives around to the nearest sewage outlet can be time consuming.
It is easier and faster to transport the service cart to the locomotive. Large flat free tires allow the cart to be easily transported over rough terrain. Dumping is quickly accomplished by opening the locomotive style dumb slide valve it the front of the cart. The tank’s ball valve vent serves as a fitting to attach a water hose for clean out after dumping. Built in adapters to transport the cart with a forklift if required. Holds 42 gallons.
( We Do Not Sell The Sewage Hose.)Now with parking brakes to prevent cart from moving when in use!
-
Add to cartMORE INFOTransition Section Lifter
$240.57- Lifts GEVO Stage 1, Stage 2 & FDL Transition sections.
- 6’ lifting strap to clear stack and hatch of locomotive.
- Enables crane lifting vs. manual extraction.
- Safety strap attached to connect to carbody frame when temporarily disconnected from the crane during repositioning. Slack in safety strap can be adjusted as necessary.
- Knurled handle to hand tighten lifter.
-
Add to cartMORE INFOForklift Torch Cart
$2,989.95- Use with any size forklift to transport gas bottles and cutting equipment around your repair facility. Also has lifting points to be moved with an overhead crane.
- The drop gates hold the bottles in place and provide ramps to remove and install the gas bottles.
- Holds up to a 9″ bottle on one side and up to a 12″ bottle on the other side
- Two toolboxes are included for storage of equipment and parts.
- A 50’ capacity spring take-up hose reel is also included.
-
Add to cartMORE INFORail Wheel Mounted Ergonomic Swivel Chair
$3,139.92Our new Ergonomic chair is mounted on rail wheels to provide access for repairs under freight cars or locomotives. It is equipped with a swivel that provides 360 degrees of rotation, and glides that allow 30” of side-to-side movement. The back rest is fully adjustable, and features a gas strut to allow simple placement. Includes manual wheel brake and fire resistant cushion material.
-
Add to cartMORE INFOAir Brake Cylinder Tester
$2,998.87Our new testing system is designed to check any air brake cylinder for leakage. It was specifically designed to test both of the Wabcopac brake beam mounted cylinders. Simply charge the cylinder, place the control handle in the “Hold” position, and observe the built-in gauge to determine if the cylinder is leaking. Comes with a two-wheel cart, control system, and all necessary test hoses and connections.
-
Add to cartMORE INFOGas Bottle Holder For Truck Or Utility Vehicle
$1,283.78Use our new holder to transport fuel and oxygen bottles used for cutting and welding operations. The holder bolts to the bed, and has a lift-off segment for gas bottle replacement using a crane or hoist. The standard holder fits seven and eight inch bottles. Holders are available for other cylinder sizes.
