F-Pin Fixture With Caster Base
Hydraulic F-Pin Fixture is designed to remove or install F-Pins in any style of coupler or draft gear. Flat-free 8″ tires easily roll across rough shop floor surfaces. The heavy-duty plastic retention sleeve is designed to automatically retract during pin insertion. The fixture has a collapsed height of 36 1/4″, and an extended height of 54 1/4″. The jack cylinder stroke is 18″. The base of the jack features a snap-in quick release design to allow insertion of the jacking assembly into the caster base.
You may also like…
F-Pin Fixture With Aluminum Base Plate$596.96
Hydraulic F-Pin Fixture is designed to remove or install F-Pins in any style of coupler or draft gear. The heavy-duty plastic retention sleeve is designed to automatically retract during pin insertion. The jack cylinder stroke is 18″. The base of the jack features a snap-in quick release design to allow insertion of the jacking assembly into a portable aluminum base for line-of-road use.
67″ to 104″ Telescoping Brake Stick With Handle Magnet$486.00* New smaller head made of 865 manganese bronze non-sparking with a
thickened edge strong as steel. Fits better in brake wheel hand wells.
* New baseball bat end prevents possible slipping off of hands when pulling.
* Solid positive locking system.
* Telescopic Handle* Handle Magnetic
– Keeps the Brake Sticks off the ground which reduces
bending, loss, and potential tripping hazard!
24″ x 36″ Aluminum Jacking Pads (Sets Of Two)$3,750.00
Constructed of light-weight aluminum, these pads provide a sturdy, stable base for freight car jacking on line-of-road.
The 24″ X 36″ pad weighs 120 pounds and is equipped with transport handles for ease of placement by personnel or crane. Internal dimensions of this pad are 24 1/4″ X 36 1/2″. They are designed to accommodate standard 12″ X 36″ oak blocking,
These pads are sold in sets of two.
Brake Rod Support Fixture$139.95
The Brake Rod Support Fixture provides a fast, secure method of retaining brake rods during truck removal. It keeps the rods in place during truck movement, eliminating the possibility of the rod catching on the shop floor or ties on line of road. Ball bearings allow the fixture to move smoothly over the axle and eliminates any possibility of axle scratching.