Showing 244–270 of 484 results
-
Add to cartMORE INFOMulti Craft Switch Lock With Cable Lanyard
$110.94* The Multi-Craft Switch Lock is designed to lock out track switches to provide protection for personnel working on adjacent tracks. It has a four-hole design to allow the placement of switch locks from multiple crafts.* The Cable lanyard allows the lock to be permanently fastened to a tie or other structure if required for continuous use. -
Add to cartMORE INFOPortable Switch Point Lock
$244.95This portable Switch Point Lock is used to lock the switch point on any track where services is being performed. The Lock provides additional measure of safety for maintenance personnel working on line-of-road or within yards. Fits all standard craft padlocks.
-
Add to cartMORE INFOCSX Padlock Lockout
$39.95This padlock lockout device is used to provide extra measure of protection for Mechanical Department personnel working on line of road. It is designed to fit over an applied switch lock to prevent access. This will ensure that the switch lock cannot be removed if Mechanical personnel are still working on a protected track.
-
Add to cartMORE INFONorfolk Southern Padlock Lockout
$33.96This padlock lockout device is used to provide extra measure of protection for Mechanical Department personnel working on line of road. It is designed to fit over an applied switch lock to prevent access. This will ensure that the switch lock cannot be removed if Mechanical personnel are still working on a protected track.
-
Add to cartMORE INFOSargent & Greenleaf Padlock Lockout
$39.95This padlock lockout device is used to provide extra measure of protection for Mechanical Department personnel working on line of road. It is designed to fit over an applied switch lock to prevent access. This will ensure that the switch lock cannot be removed if Mechanical personnel are still working on a protected track.
-
Add to cartMORE INFOUnion Pacific Padlock Lockout
$38.75This padlock lockout device is used to provide extra measure of protection for Mechanical Department personnel working on line of road. It is designed to fit over an applied switch lock to prevent access. This will ensure that the switch lock cannot be removed if Mechanical personnel are still working on a protected track.
-
Add to cartMORE INFO26″ Truck Side Frame Support Fixtures ( Set Of Two)
$649.92These fixtures are designed to support freight car truck side frames during wheelset replacement.
They are intended for use at facilities where an overhead or jib crane is not available, allowing wheelsets to be replaced with the use of only a forklift.
Strong steel construction securely supports the side frames. -
Add to cartMORE INFO
28″ Truck Side Frame Support Fixtures (Set Of Two)
$649.92These fixtures are designed to support freight car truck side frames during wheelset replacement.
They are intended for use at facilities where an overhead or jib crane is not available, allowing wheelsets to be replaced with the use of only a forklift.
Strong steel construction securely supports the side frames. -
Add to cartMORE INFOEmpty Car Spring Replacement
$4,567.98The Empty Car Truck Spring Replacement Fixture provides
a safe, effective method of replacing broken truck springs
on empty cars in the train yard, eliminating switching moves and out-of service time.
This tool is normally transported in back of a pick-up truck
along with the extra springs, we recommend using a
12 Volt DC hydraulic pump (10,000 PSI) Instructional video
is available. ( Does Not include Pump)
When ordering the Empty Car Spring Change Fixture one needs to specify Tall Base or Short Base. The Tall Base is used for exposed rail and the short base is for tracks that are flush with the pavement. -
Add to cartMORE INFOSide Access Center Pin Removal Tool
$509.95Designed to remove and install freight car truck center pins.
Constructed from alloy aluminum to keep the tool weight to a minimum.
The pass-through design allows the tool to be to be slipped over the center pin while it is still engaged with the bolster and center plate.
A simple screw type mechanism located at the end of the handle provides a fast and efficient method of securing the center pin.
Tool is 64″ long and weighs 10 lbs. -
Add to cartMORE INFOStandard Style Roller Bearing Adapter Strap
$18.98The Roller Bearing Adapter Retaining Straps keeps hands and fingers out of harms way when replacing freight car wheelsets. The strap retainers have been specifically designed to fit all sizes of adaptors. The retainers do not require positioning, and will not slip or slide in the webbing, unlike straps utilizing conventional triangular or “D” rings. A quick pull on the webbing tightens the strap, safely securing the adapter in the side frame. The strap is easily removed by pushing the webbing release button. Two straps are required for wheelset replacement.
