Showing 406–432 of 484 results
-
Add to cartMORE INFORoller Bearing Adapter Rack
$3,649.96- This rack is designed to store 5-1/2”, 6”, 6-1/2”, and 7” roller bearing adapters.
- Keeps adapters stored in one convenient, easily accessible location.
- Includes a lower shelf to hold various repair components.
- Rack dimensions are 23” deep, 69” wide, and 68” tall.
- Includes holes in the rack feet to mount the rack to the floor if required.
-
Add to cartMORE INFOShort Slack Adjuster Transport Basket
$2,205.88- Use our new Slack Adjuster Transport Rack to store slack adjusters and ship them to the vendor for rebuilding.
- The bar grate flooring provides a strong surface that allows water and snow to pass through.
- May be handled either with a forklift or overhead lifting equipment.
- Length: 71″, Width 28″, Height 28″
-
Add to cartMORE INFOSlack Adjuster Transport Basket
$2,633.18- Use our new Slack Adjuster Transport Rack to store slack adjusters and ship them to the vendor for rebuilding.
- The bar grate flooring provides a strong surface that allows water and snow to pass through.
- May be handled either with a forklift or overhead lifting equipment.
- Length: 91″, Width 28″, Height 19″
-
Add to cartMORE INFORotating Head Hand Brake Lifter
$495.95- Use our new rotating hand brake fixture to remove or install wheel type freight car hand brakes.
- May be used with any overhead crane, hoist, or forklift equipped with a hook type lifting device.
- Includes standard lifting identiication tag.
- Equipped with a rotating mechanism that allows the hand brake to be removed in a vertical, balanced position even if the wheel mechanism is broken and jammed.
-
Add to cartMORE INFOForklift Torch Cart
$2,989.95- Use with any size forklift to transport gas bottles and cutting equipment around your repair facility. Also has lifting points to be moved with an overhead crane.
- The drop gates hold the bottles in place and provide ramps to remove and install the gas bottles.
- Holds up to a 9″ bottle on one side and up to a 12″ bottle on the other side
- Two toolboxes are included for storage of equipment and parts.
- A 50’ capacity spring take-up hose reel is also included.
-
Add to cartMORE INFOExtended Length Draft Gear And EOC Fixture
$4,997.98- This is the revised, extended length version of our draft gear installation fixture.
- The fixture includes interchangeable saddles for draft gear and EOC installation.
- The extended length allows access from the end and sides of the freight car.
- Includes storage areas for the saddles, and a storage tray to hold parts during installation and removal.
-
Add to cartMORE INFO3/4″ Drive x 3/4″ Quick Change Adapter
$64.08These adapters provide a “quick change” mechanism by the use of a sliding collar and two positive retention balls for fast change of a socket on the end of a tool anvil. Works with Impact tool anvils that have a clip retention device or pin hole. A pin hole type anvil and use of a pin and retaining o-ring recommended to secure this adapter to the anvil.
3/4″ Drive x 3/4″ Impact Quick Change Adapter | Poly bag with barcode | Weight: 1.23 lbs. | Lifetime Warranty -
Add to cartMORE INFO1/2” Drive – 9/16” Shallow Universal Impact Socket
$18.78Use these common sizes of 1/2” Drive Universal Deep and Shallow Impact Rated Sockets to perform repairs to Air Brake Systems and other locomotive and freight car components. The thin wall design allows access to fasteners in tight spaces. Other sizes are available in 3/8”, 1/2”, and 3/4” drives in both S.A.E. and Metric shallow and deep. We offer the full line of Grey Pneumatic impact products.
-
Add to cartMORE INFO1/2” Drive – 9/16” Deep Universal Impact Socket
$20.96Use these common sizes of 1/2” Drive Universal Deep and Shallow Impact Rated Sockets to perform repairs to Air Brake Systems and other locomotive and freight car components. The thin wall design allows access to fasteners in tight spaces. Other sizes are available in 3/8”, 1/2”, and 3/4” drives in both S.A.E. and Metric shallow and deep. We offer the full line of Grey Pneumatic impact products.
-
Add to cartMORE INFO
1/2” Drive – 3/4” Shallow Universal Impact Socket
$20.96Use these common sizes of 1/2” Drive Universal Deep and Shallow Impact Rated Sockets to perform repairs to Air Brake Systems and other locomotive and freight car components. The thin wall design allows access to fasteners in tight spaces. Other sizes are available in 3/8”, 1/2”, and 3/4” drives in both S.A.E. and Metric shallow and deep. We offer the full line of Grey Pneumatic impact products.
-
Add to cartMORE INFO
1/2” Drive – 3/4” Deep Universal Impact Socket
$22.95Use these common sizes of 1/2” Drive Universal Deep and Shallow Impact Rated Sockets to perform repairs to Air Brake Systems and other locomotive and freight car components. The thin wall design allows access to fasteners in tight spaces. Other sizes are available in 3/8”, 1/2”, and 3/4” drives in both S.A.E. and Metric shallow and deep. We offer the full line of Grey Pneumatic impact products.
-
Add to cartMORE INFO
1/2” Drive – 15/16” Shallow Universal Impact Socket
$22.38Use these common sizes of 1/2” Drive Universal Deep and Shallow Impact Rated Sockets to perform repairs to Air Brake Systems and other locomotive and freight car components. The thin wall design allows access to fasteners in tight spaces. Other sizes are available in 3/8”, 1/2”, and 3/4” drives in both S.A.E. and Metric shallow and deep. We offer the full line of Grey Pneumatic impact products.
-
Add to cartMORE INFO
1/2” Drive – 15/16” Deep Universal Impact Socket
$25.41Use these common sizes of 1/2” Drive Universal Deep and Shallow Impact Rated Sockets to perform repairs to Air Brake Systems and other locomotive and freight car components. The thin wall design allows access to fasteners in tight spaces. Other sizes are available in 3/8”, 1/2”, and 3/4” drives in both S.A.E. and Metric shallow and deep. We offer the full line of Grey Pneumatic impact products.
-
Add to cartMORE INFOBrake Shoe Test Block
$184.92- The new 1 1/2″ Brake Shoe Test Block is designed to be placed between the brake shoe and the wheelset when performing freight car air brake tests.
- The block itself is made from High Strength Delrin plastic that will not crush or break as a result of the test pressures.
- The handle is made from light-weight alloy aluminum and includes a comfortable rubber handle for the operator.
-
Add to cartMORE INFOPry Bar Brake Shoe Test Block
$304.89• Our new 2″ thick Brake Shoe Test Block is designed to be placed between the brake shoe and the wheelset when performing freight car air brake testing.
• This new version of the Test Block includes a pry bar end that is specifically designed to push back brake shoes.
• The block itself is made from High Strength Delrin plastic that will not crush or break as a result of the test pressures.
• The handle is made from light-weight alloy aluminum and is knurled to provide a slip-resistant grip for the operator. -
Add to cartMORE INFOAluminum Hopper Gate Hand Wheel
$249.85- Use our new Hand Wheel to open or close Hopper Car Outlet Gates.
- The wheel is made of aluminum to keep the tool weight to a minimum (seven pounds).
- The fifteen inch diameter hand wheel provides the operator with leverage to open stubborn gates.
- The gate shaft is made of tool steel to provide a long-lasting contact surface.
-
Add to cartMORE INFOLift Table Trolley System
$9,745.88This rail mounted lift table is designed to remove and install Center Of Car and End Of Car Cushioning devices as well as draft gear assemblies. Comes equipped with a 110 volt, 3000 lbs. capacity hydraulic lift table with remote control and electric pinch point guard. Collapsed height is 12″ and extended height is 43″.
-
Add to cartMORE INFOLift Table Trolley System With Transfer Table
$11,859.71This version of our Lift Table Trolley System includes a Ball Transfer Table that allows two inches of left to right, and twelve inches front to rear movement for component positioning. The ball transfers are sealed and bolted to the table for easy replacement if damaged. The collapsed height is 14 1/2″ and the extended height is 43″.
-
Add to cartMORE INFOAluminum 8” Intermodal Car Side Sill Stands (Set Of Four)
$3,495.84Use our new Aluminum 8” Side Sill Stands to support intermodal car sections after they are separated to perform truck or coupler repairs. They are designed for use at facilities with paved floors that are even with the top of the rail. The aluminum construction keeps the weigh of the stand under 26 pounds. The durable heavy-duty rubber top eliminates metal-to-metal contact.
-
Add to cartMORE INFO
Aluminum 8” Intermodal Car Side Sill Stand (Single Stand)
$873.96Use our new Aluminum 8” Side Sill Stands to support intermodal car sections after they are separated to perform truck or coupler repairs. They are designed for use at facilities with paved floors that are even with the top of the rail. The aluminum construction keeps the weigh of the stand under 26 pounds. The durable heavy-duty rubber top eliminates metal-to-metal contact.
-
Add to cartMORE INFOService Track Equipment Storage Rack
$2,769.89Use our new rack on service tracks or any other location requiring the storage of tools and equipment. Tube slots are provided for pry bars, brooms, sledge hammers, or any other tools or equipment with handles. Large and small hooks located on the sides and ends of the rack are adjustable. They are designed to store ladders, cords, or any other equipment as necessary. A basket is provided for the storage of miscellaneous small parts. Mounting holes are provided to anchor the rack the ground if required.
