Manual Side Access Wheel Fixture
Same as our Hydraulic Side Access Wheelset Handling Fixture, only manually operated.
The fixture fits over the forklift tines with a safety chain that hooks over the forklift mast to keep the fixture in place during wheel handling.
Hydraulic Side Access Wheel Fixture$2,625.47
The Hydraulic Side Access Wheelset Handling Fixture provides a safe easy method of removing any size wheelset from the side of the freight car. The hydraulicaly operated gripper makes replacement a one person job. The fixture fits over the forklift tines with a safety chain that hooks over the forklift mast to keep the fixture in place during wheel handling. Forklift must be equipped with an auxiliary hydraulic control valve for operations of the double acting hydraulic cylinder to be used.
Winks Multi Table$4,889.41The Winks Multi Table is a double tine forklift attachment that is used for taking out and installing draft gear assemblies and EOC’s.
- The head on the front of the fixture has multiple sets of holes for different cradles to hold a draft gear assembly or an EOC.
- This head rotates to allow for easier positioning.
- Two sliding support arms slide which run on a track to hold the carrier plate during these removals or installations. One of these support arms has a square base so that it can be rotated 90 degrees to fit up into the sill. The support arms can be raised by adding extension pegs to their risers.
Forklift Lifting Fixture 4” Fork Width$480.00Unique design, the heavier the load the tighter the grip. No tools required for attaching. Slides on to fork, tighten the two hand knobs and secure the safety chain. Extension Shackle and Swivel Auto Lock Hook included. W.L.L. 3000 Lbs.
Fits on 4” Wide Forks.